Skip navigation.
Home
Enlightening Research

soil EC mapping

LandMapper ERM-02 - new handheld EC/ER/SP meter

LandMapper - field EC meter with lab accuracy*We have a new bath of LandMappers ERM-02 in stock! Please, contact us info@landviser.com or +1-609-412-0555 / 888-306-LAND to discuss suitability of ERM-01 or ERM-02 for your applications.  *******

LandMapper ERM-02 is a newest device in the product line of Landviser, LLC. This portative device can measure three important electrical properties of solid, semisolid, and liquid media: electrical resistivity (ER), conductivity (EC), and potential (EP). Using the most accurate four-electrode principle LandMapper ERM-02 measures ER or EC to help new deviceyou to delineate areas with contrasting soil properties within the fields quickly, non-destructively, and cost-efficiently. Using the device prior to soil sampling you can significantly reduce the amount of samples required and precisely design a sampling plan based on the site spatial variability.

LandMapper ERM-02 measures electrical resistivity or conductivity of soils and related media for express non-destructive mapping and monitoring of agricultural fields as well as construction and remediation sites. In a typical setting, a four-electrode probe is placed on the soil surface and an electrical resistivity or conductivity value is read from the digital display. The device measures electrical resistivity or conductivity in a surface soil layer of the depth from 2 cm down to 20 m, which is set by varying the size of a four-electrode probe.

LandMapper ERM-02 is the most versatile device in LandMapper series and allows you not only measure ER and EC using artificially applied electrical current and four-electrode probes, but also study natural electrical fields in soils (self-potentials) and plants (bio-potentials) with patented non-polarizing electrodes. Electrical balance between soil and plants is important for plant health and electrical potential gradient governs water and nutrient uptake by plants. Monitoring of electrical potentials in plants and soils is a cutting-edge research topic in the leading scientific centers around the world. 

Make your own four-electrode probe for soil mapping

Materials4-probe-collapsed

  • ¾” PVC pipe, one section of 10’.
  • 2 T-shaped PVC pipe connectors fitting ¾” pipe from all three ends.
  • 2 ¾” PVC cups (optional).
  • #18 AWG isolated stranded wires, red and black, 15’ each.
  • 1”x2” Velcro strip (optional).
  • 3 #6 1.5” screws for wood (optional).
  • 4-electrode probe kit (available from Landviser, LLC) including:
    • - 4 stainless steel electrodes (sharpened d= ¼” L=6” bolts)
    • - 8 stainless steel ¼” nuts for connecting electrodes with the wires
    • - 4 nylon isolated terminals for 18” AWG wire with 5/16” opening
    • - 4 banana plugs (2 black, 2 red) for connecting with LandMapper terminals

Sign up for webinar "Application of Geophysical Methods to Agriculture: Methods Employed"

Dr. Larisa Golovko (President of Landviser, LLC) will be presenting "Geophysical Methods of Electrical Resistivity and Self-Potential in Agriculture" in first of 

 

 

Agricultural Geophysics Webinar Series: "Application of Geophysical Methods to Agriculture: Methods Employed"

A live webinar on the application of geophysics to agriculture will be offered on:

Tuesday, February 18, 2014, from 3pm - 4:30pm EST
(2:00 - 3:30 CST, 1:00 - 2:30 MST, 12:00 - 1:30 PST)

This first in a series of agricultural geophysics webinars will focus on the near-surface geophysical methods presently being used for agricultural purposes, which include resistivity, self-potential, electromagnetic induction, ground penetrating radar, dielectric sensors, VIS/NIR/MIR spectrometry, gamma ray spectrometry, mechanical soil compaction sensors, and ion selective potentiometry. Five presenters will provide a short overview of agricultural geophysical methods during the first 30 minutes of the webinar. The last hour of the webinar will be devoted to a panel discussion with the presenters, who will answer questions from the audience.

Location

28° 8' 11.7564" N, 90° 50' 5.8596" W

References

Bedmar, A.P., and Araguás, L.A., 2002, Detection and prevention of leaks from dams: Taylor & Francis, Exton, PA.

Carrow, R.N., and Duncan, R.R., 2004, Soil salinity monitoring: present and future: Golf course management, no. November, p. 89-92.

Corwin, R., 1990, The self-potential method for environmental and engineering applications: Geotechnical and Environmental Geophysics, Soc. Expl. Geophysics, Tulsa, OK, p. 127-143.

Quick Estimation of Salinity in Field Soils and Irrigation Water with LandMapper ERM-02

ec mapping with Landmapper on dead rice field after hurracaine IkeSoil salinity is routinely evaluated in the labs from electrical conductivity of liquid soil saturation extract (ECe). The resulted total salinity is reported either directly in conductivity units (dS/m) or converted to TDS (total dissolved solids) concentration in ppm (parts per million) using formula: 1 dS/m = 1 mS/cm = 1 mmho/cm = 640 ppm = 640 mg/L= 0.64 g/L=0.064%

But now EC of soil and waters can be measured directly in the field using highly accurate method of four-electrode probe and Landmapper ERM-02 measuring device. Best of all, probes can be build to sense different soil layers down to 30 ft! Probes are simple and inexpensive to make from common materials available at any hardware store.

For irrigation water and soil solutions: To measure ECw just put 4-electrode probe of Landmapper used for mapping into a ditch, canal, or other water source. Make sure that all 4-electrodes are in contact with water. Take a reading in EC (conductivity) mode. Display will read (example):  
K0*C= 150m  - which indicates milli Siemens (mS/m)
To convert to dS/m, divide display number by 100, i.e. 150 mS/m=1.5 dS/m.

Soil Science

Applications of electrical geophysical methods in classic Soil Science (Pedology, Soil Genesis and Classification) - browse the links and maps on this page to find out more...

Using LandMapper to Monitor Soil Salinity and Mitigate Its Effects on Rice Production at US Gulf Coast

Landmapper - Portable and Scalable EC meterMost of the soils along US Gulf Coast are naturally slightly saline and some are waterlogged during much of the growing season. Naturally, those areas are used for rice production rotated with cattle grazing or hay growing. Soil salinity of those areas varies spatially and temporarily due to drought, hurricane-pushed sea water surges, micro-elevation within fields, variability of salinity levels in irrigation water. Monitoring soil and water salinity with conventional techniques of collecting soil samples by farmer and sending them to outside lab is costly and time-consuming. Such approach fails to provide timely advice to the farmer regarding crop selection pre-planting and mitigation inputs during the growing season. Several rice farms affected by Katrina and Ike hurricanes were monitored in 2006-2011 utilizing field soil EC meter, LandMapper ERM-02, consumer-grade GPS, and other common equipment available to a farmer. On six test fields EC values were recorded with LandMapper directly in the field at 30 locations in less than 45 min.

Cite this presentation:

Golovko, Larisa, and Anatoly Pozdnyakov. “Using LandMapper to Monitor Soil Salinity and Mitigate Its Effects on Rice Production at US Gulf Coast.” In Making Waves: Geophysical Innovations for a Thirsty World. Tucson  AZ: Environmental and Engineering Geophysical Society, 2012. http://www.landviser.net/webfm_send/94.SAGEEP 25 - 2012 - Tucson, AZ

Registered users can download full proceeding paper: 
 

Using LandMapper to Monitor Soil Salinity and Mitigate Its Effects on Rice Production at US Gulf Coast

Locations

Winnie, TX 29° 49' 12.7956" N, 94° 23' 2.6808" W
SAGEEP 2012 Tucson, AZ 32° 13' 18.2748" N, 110° 55' 35.3244" W

LandMapper ERM-01 - simple handheld resistivity meter

Throw away your augers and soil samplers! Well, not quite... LandMapper® ERM-01 is new non invasive device, which will help you to map land parcels with contrasting soil properties within the fields quickly, non destructivelyand cost-efficiently.

Landmapper is an excellent tool for soil mapping required for environmental consulting, golf courses maintenance, construction services, farm management, new land development, and real-estate planning. It is a must have tool for forensic and archaeological investigators, even for serious treasure hunters. Using this non invasive device prior to soil sampling you can significantly reduce the amount of samples required and precisely design a sampling plan based on the site spatial variability.

LandMapper® ERM-01 measures electrical resistivity or conductivity of soils and related media for express non invasive mapping and monitoring of agricultural fields as well as construction and remediation sites. In a typical setting, a four-electrode probe is placed on the surface and an electrical resistivity value is read from the digital display. The device measures electrical resistivity in a surface layer of the depth from 2 cm down to 20 m, which is set by varying the size of a four-electrode probe. Measurements are based on well-known four-electrode principle, which allows to avoid influence of electrode contact potential on measured electrical conductivity or resistivity of the media and obtain accurate readings.  The field tests were performed by our customers in USA, Russia, China, Canada, Sweden, France, Germany, Iraq, Dubai, Brazil, Panama and many others.

Electrical Geophysical Methods to Evaluate Soil Pollution from Gas and Oil Mining

transect across bitumen polluted soil and brune collectorElectrical geophysical methods were successfully used for exploration of gas and oil fields (Kalenev, 1970). However, the methods are not widely used for estimation of the soil pollution with petroleum products (Znamensky, 1980; Pozdnyakov et al., 1996a). The possibility of using the methods of electrical resistivity to evaluate the places of petroleum pollution or natural petroleum and gas deposits is based on highly different resistivities of soil and petroleum products. Petroleum and various products of petroleum manufacture, such as oil, gasoline, bitumen, and kerosene have very high electrical resistivity compared with soils. Electrical resistivity of petroleum varies from 104 to 1019 ohm m (Fedinsky, 1967), whereas resistivity of petroleum-saturated sand is much lower (2200 ohm m) (Znamensky, 1980), but is still higher than that of any non-polluted soil.

Soil pollution by the products of gas and petroleum mining was studied near Urengoi in northwest Siberia, Russia. The virgin soils, Glacic and Aquic Haplorthels, were extremely polluted with various by-products of petroleum extraction and manufacturing, such as bitumen, gasoline, kerosene, and mining brine solutions. The study area was thoroughly investigated with four-electrode profiling on 1.2-m array and vertical electrical sounding.

Location

Urengoj 65° 57' 27" N, 78° 23' 4.2" E
Syndicate content