Skip navigation.
Home
Enlightening Research

shareware

warning: Creating default object from empty value in /home/landv0/public_html/landviser.net/sites/all/modules/i18n/i18ntaxonomy/i18ntaxonomy.pages.inc on line 34.

Formatting Array Input Data File in RES2DINV: surface electrodes for any geometry

pseudosection for 2D resistivity surveys

Example of electrodes arrangement and measurement sequence that can be used for a 2-D electrical imaging survey is shown on the left. Many different multi-electrode systems have been developed over the past 15 years using different arrangements of the cables and measurement strategies (Loke, 2011). This program is designed to invert large data sets (with about 200 to 100000 data points) collected with a system with a large number of electrodes (about 25 to 16000 electrodes). The survey is usually carried out with a system where the electrodes are arranged along a line with a constant spacing between adjacent electrodes. However, the program can also handle data sets with a non-uniform electrode spacing. RES2DINV program can be used for surveys using the Wenner, pole-pole, dipole-dipole, pole-dipole, Wenner-Schlumberger, gradient and equatorial dipole-dipole (rectangular) arrays. In addition to these common arrays, the program even supports non-conventional arrays with an almost unlimited number of possible electrode configurations (Loke et al. 2010). You can process pseudo sections with up to 16000 electrode positions and 70000 data points at a single time on a computer with 4 gigabytes (GB) of RAM. Besides normal surveys carried out with the electrodes on the ground surface, the program also supports aquatic and cross-borehole surveys.

Locations

Los Angelos 34° 3' 8.0424" N, 118° 14' 37.266" W
5° 49' 22.6488" S, 34° 58' 49.6884" E

Adding Lat-Long for the centroids of USA counties in a new point shapefile (ArcMap 10)

Software: ArcGIS - ArcEditor 9.2, 9.3, 9.3.1, 10 ArcGIS - ArcInfo 9.2, 9.3, 9.3.1, 10 ArcGIS - ArcView 9.2, 9.3, 9.3.1, 10 ArcGIS for Desktop Advanced 10.1 ArcGIS for Desktop Standard 10.1

USA counties center pointsThis is documented step-by-step and hands-on exercise on how to create XY point shapefile for the centers of USA counties (with linked basic demography and FIPS) in ArcMap 10.1. You don’t need to follow those steps (and if you don’t have ArcGIS for Desktop, you cannot) and may just grab the resulted layer file in various formats at the end of this post. Formats available are MS Excel table, CSV table with XY, zipped SHP file package, and KMZ file.

This layer is not directly shareable on ArcGIS Online, as it has more than 1000 features (3143, to be exact), we may post it there later as partial files…

If you need help with your GIS project, please, do not hesitate to contact Landviser, LLC - post comment, email info@landviser.com, or call 609-412-0555. Current complete catalog of Landviser LLC

RES3DINV - 3D inversion geophysical software for resistivity and induced polarization data

RES3DINV software -Create 3D models of subsurface resistivity or IP!
For Windows XP/Vista/7  (available for 32- and 64-bit PCs.)

3D surveys for pole-pole, pole-dipole, dipole-dipole, rectangular, trapezoid, Wenner, Wenner-Schlumberger,and non-conventional arrays.

Now available as a combined package together with RES2DINV, the 2D Resistivity & IP inversion program.
Supports exact and approximate least-squares optimisation methods
Supports smooth and sharp constrasts inversions
Supports up to 5041 electrodes and 67500 data points on computers with 1GB RAM
Supports trapezoidal survey grids
Supports parallel calculations on Pentium 4 (and compatible) based computers
Multi-core support with RES3DINVx32, 128GB memory support with RES3DINVx64

Syndicate content